Product ID:G203 SPECIALITY STEEL
MSDS Date:07/01/1991
FSC:6850
NIIN:00F025551
MSDS Number: BPSFT

DYNAMET POWDER PRODUCTS

600 MAYER STREET
BRIDGEVILLE, PA 15017
US

Emergency Phone: 412-257-5102

Info Phone: 412-257-5102

Cage: GO164

DYNAMET POWDER PRODUCTS

BRIDGEVILLE, PA 15017 US

Telephone: 412-257-5102

Cage: GO164

ALUMINUM (POWDER)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

BORON OXIDE, TRIOXIDE

CAS: 1303-86-2

RTECS: ED7900000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

COBALT

CAS: 7440-48-4

RTECS: GF8750000

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/CUM (CEILING)

ACGIH TLV: 0.5 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (DUST & MIST), BRONZE POWDER

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MANGANESE, MN COMPOUNDS

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MOLYBDENUM (SOLUBLE COMPOUND), LEAD MOLYBDATE

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.05 MG/CUM IC

VANADIUM

CAS: 1314-62-1

RTECS: YW1355000

OSHA PEL C,0.5 MG/M3

ACGIH TLV: 0.05 MG/M3RDUST;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TANTALUM

CAS: 7440-25-7

RTECS: WW5505000

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEATING, CUTTING, BRAZING
OR WELDING MAY CAUSE ADVERSE HEALTH EFFECTS DUE TO SOME OF THE
CONSTITUENTS IN THE FORMULA.
Explanation of Carcinogenicity:SEE INGREDIENTS

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION
IF BREATHING STOPS, OR OXYGEN IF NECESSARY. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Extinguishing Media:NO FIRE OR EXPLOSION HAZARD.

Handling and Storage Precautions:DURING WELDING, PRECAUTIONS SHOULD BE
TAKEN FOR AIRBORNE CONTAMINANTS & NOXIOUS GASES THAT MAY ORIGINATE
FROM COMPONENTS OF WELDING ROD.
Other Precautions:WHEN HEATED FOR HOT DEFORMATION, PRECAUTIONS SHOULD
BE TAKEN TO PREVENT BURNS.

Respiratory Protection:USE DUST MASK WHEN HANDLING IN ITS POWDER FORM.
USE PROPERLY FITTED, NIOSH APPROVED, DUST FUME RESPIRATOR DURING
WELDING OR BURNING WHEN FUMES EXCEED TLV.
Ventilation:EXHAUST SYSTEMS WHEN ABRASIVE CUTTING, GRINDING, WELDING &
BURNING.
Protective Gloves:RECOMMENDED SEE SUPP.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED FOR THE OPERATION BEING
PERFORMED.
Supplemental Safety and Health
GLOVES: SHOULD BE WORN IN THOSE CASES WHERE SHARP EDGES, SLIVERS OR
BURRS MAY EXIST ON THE MATERIAL.

HCC:N1
Appearance and Odor:SOLID W/METALLIC LUSTRE ODORLESS.
SHEETS/STRIP/BARS/RODS/BILLETS/SHAPES/PROFILE

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:METAL FUMES & CERTAIN NOXIOUS GASES
SUCH AS CO MAY BE PRODUCED DURING WELDING OR BURNING

Waste Disposal Methods:IF IS RECOMMENDED ALL SCRAP GENERATED BE
RECLAIMED & SUBSEQUENTLY RECYCLED. DISPOSE OF IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.